Geyser is a 180mm ducted quad for 85mm props, made to be an all purpose cinematic platform for whatever you want to throw at it. The bottom plate is 3mm, the top plate 2mm. Standoff spacing is the same as the Squirt, so Squirt cam mounts work with the Geyser as well.
Geyser is made for 16x19 mount motors. I take a motor that works on 4s for 4" props and use it here on 5 or 6s with 85mm props. My prop cutter works for Nutmeg, Squirt and Geyser.
You can use Squirt's cam mounts for a fixed cam single operator configuration. Or you can print the servo mount and make Geyser a dual operator video rig. Cam mounts can hold an aio cam/vtx or a micro cam for dual operator use, or no second cam for single operator/camstab.
The carbon and hardware kit contains all the screws and standoffs you need to build the frame, as well as a pink standoff (the black ones don't fit in the bearings) and bearings for the servo tilt mech.
The full kit has all of the above as well as the ducts, servo cam mount, and two sets of fpv cam mounts.
Due to the large number of permutations, allow up to day for 3d printing.
Read more about it here.