The Rapture is a 250 x 180mm stretch plus frame with a 3d printed nylon aero canopy. The base is 3mm carbon, and the canopy is printed from either white Taulman 645 nylon, or black HP Fusion nylon. The two prints are of similar strength, but the HP canopy is higher res for lighter weight and superior aesthetics (you can see the difference in the last picture).
The Rapture's arms are narrow and streamlined to maximize the thrust coming off the props, and its main body is aero to minimize drag. Depending on the setup, the Rapture's arms can save up to 240 grams of thrust.
Frame weight is 98 g for black HP, 102 g for white Taulman 645.
The Rapture takes a 4 in 1 esc that is no wider than 36mm, such as the Aikon. A pigtail vtx with remote channel changing capabilities is recommended. The camera mount is for HS1177 form factor cameras with 2.1 or 2.5 lenses. Click stops for the camera are at 30, 45, and 60 degrees.
You can print your own armguard/motor soft mounts or order the frame with them. Indicate your color choice in the comments (red/blue/orange/green). The file is here.
Read about its development here.